Symbiote Thumb Nut Wrench

Description

Symbiote Thumb Nut Wrench

The Symbiote Thumb Nut Wrench is an accessory / optional tool that can be purchased to aid in easier adjustment. The thumb nuts were designed in such a way to allow easy adjustment. Some users will want even faster, easier adjustment of their pupillary distances. If you find yourself needing to adjust often, this is a tool you should consider.

This tool is not included standard

To avoid somewhat unnecessary cost in the Symbiote, and for the fact that the thumb nuts are adjustable by hand, we don’t include this tool standard with your Symbiote. So if you want one, you need to add it separately.

3D printed specifically for our bridge

We 3D print this part from PA12CF material to the exact standards of our thumb nuts. This is a female adapter that slides over the thumb nuts allowing faster adjustment. Note: DO NOT OVER TORQUE when using this tool! Follow the procedures in our user manual to avoid damage to your bridge or components. Broken parts due to over tightening are NOT covered under warranty.

Built to make your life easier

The Thumb nut tool will make your life better! Sure, that might sound overdramatic. But, you will find easier adjustment of your symbiote bridge by using this tool. Simply grab a 1/4″ driver of your choice, and tighten it all down. Make sure you do not over torque the nut, though. Per the manual you should ONLY apply 5 inch pounds of torque to the components.